Thanks Don fort he answer, The display is ok
I just did not put every thing there It says : 20 2.0 - 1 So I enderstand that as a swr of 2.0 ??? -----Oorspronkelijk bericht----- Van: Don Wilhelm [mailto:[email protected]] Verzonden: woensdag 20 juli 2016 19:27 Aan: [email protected] <[email protected]>; [email protected] Onderwerp: Re: [Elecraft] K2 automatic tuner William, Are you reading the K2 display correctly when you do a TUNE? Normally the K2 displays the power on the left and the SWR on the right. The power is normally 20 watts and the SWR will be shown as 2 digits (1.0 through 9.9). In other words, you will see something like "20 1.0". If the KPA100 wattmeter is not indicating properly, it may be that diodes D16 and D17 have become damaged, or it may just be that the wattmeter needs to be balanced and calibrated. 73, Don W3FPR On 7/20/2016 12:33 PM, [email protected] wrote: > Hi group, > > Perhaps it's a silly question, but i don't understand something. > > I have a K2 100 watt but I don't think any other set will make a deferens. > the set is connected to a tuner (AT-100Pro LDG) and it tunes as far as > I can see ok. > > But now what I notice, when I tune the tuner tunes to swr 1.1 so that seems > to be ok, but my K2 gives me 2.0 1. > > Does that mean my K2 sees a swr from2.0 whil my tuner says it is 1.0 ?? > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
