I am stumped. I finally got around to installing a FM filter so I could work 2 meter FM. All went well and the K3 receives fine on 144. However I cannot detect output on FM (or any other mode) on 2 meters. The K3 shows RF out of 8 to 10 watts on the rig's meter, but there is no output registered on my external PWR meter running to a dummy load. I have changed coax jumpers and tested them and the PWR meter on my IC-2300H at low power and everything works.
On the air I can hear FM signals (both from the local repeater and my handheld working simplex in the shack), but I cannot trip the repeater or even detect a signal on my handheld when I key the K3. I have gone through the menu setup and everything looks like it is correct (I am not in test mode and I am not inhibiting transmit.) What am I missing? Help would be greatly appreciated. 73 ..mike AI6II -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-internal-144NHz-xvrtr-no-output-tp7620622.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
