An idle thought. Are you sure the cables are all seated properly into the xvrtr? It is not difficult to think you have the TMP cables seated only to find that all you've done is force the center contact in the jack backwards ... so that it becomes intermittent or open. Easy to spot and fix ... the little plastic surround for the center contact will be pushed backwards at a funky angle.
I learned to always leave the cover off the xvrtr when attaching cables. A couple of them (don't recall which ones specifically) are prone to this problem. Don't ask me how I know this ;) Grant NQ5T Sent from my iPhone > On Jul 24, 2016, at 9:25 AM, mike <[email protected]> wrote: > > Apparently it is an intermittent problem. Originally receive seemed to work > fine, but not now. And then just now I was able to pick up a transmission > from the K3 on my handheld, working just as it was supposed to. But then it > didn't work anymore. > > I will need move the K3 to my bench (I do hate unplugging all the cables in > back!), pop the top on the K3 and run through the diagnostics on the xvrtr. > 73 ..mike AI6II > > > > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/K3-internal-144NHz-xvrtr-no-output-tp7620622p7620623.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
