Steve,
The blinking yellow LED as well as the Self Test results seem to
indicate that the T1 is in BYPASS mode. Tap the BYP/INFO button to
alternate between ATU inline (green LED on).
73,
Don W3FPR
On 8/8/2016 12:44 PM, Steve-KI4EZL wrote:
Hello,
My T1 tuner quit working. It is about 5 weeks old.
I have video taped the attempt to tune and the self test, and posted it on
YouTube. I hope this will help with the diagnosis. Here is that link
- https://youtu.be/jprcv6q_HFQ
Station is a 33' EF wire antenna, t1 tuner, LNR MTR 5b QRP radio, Begali
traveller light iambic key. Radio runs on AA batteries, 10-11 volts. It
has always worked well before, but now does not tune.
Self test results: S=1R0, V=8R9, L=0, C=0, N=t, B=0, F=1R07.
Please advise.
Thank you,
Steve
KI4EZL
--
View this message in context:
http://elecraft.365791.n2.nabble.com/T1-as-stopped-tuning-correctly-tp7621358.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
