Try checking to be sure you have enabled an available comm port. Bill K9YEQ
-----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of JOE Sent: Sunday, August 28, 2016 10:59 AM To: [email protected] Subject: [Elecraft] W-2 Wattmeter software Hello to All, I'm having trouble with connecting to the W-2 wattmeter with the Elecraft W2 Interface software available on the website using an internet connection. The wattmeter is V1.00 software and the W-2 software is V1.12.1.18 The error is "Looking for a W2 on Network". I had this working in the past and now it has me stumped. Using Putty communication software I can connect to the remote W-2 and it responds with V1.00 when I invoke the "V" command so I know the connection is good. Using a direct connection to the W2 from the computer com port works fine. I'm using the factory cable that did work in the past. The W2 Interface software is set up with Network (TCP/IP) checked, Client, and the server IP and port that worked with Putty. This has me stumped. It has to be something simple that I am missing. 73, Joe, K1ike ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
