Hello John,
We have a remote station that is 10 miles from my house. I use
Remoterig to link a TS480SAT from my house to the remote site. There is
also a 600 watt amplifier at the site, so I am using the W2 wattmeter to
monitor the output and VSWR at the remote location. The Elecraft W2
Interface software is loaded on my computer at my house and is used as a
client to talk to the remote site. No com port is involved on the local
computer. At the site I have a device called an Avocent ESP-4 Serial
Hub. This is connected to the LAN at the site and provides 4 com ports
for various pieces of equipment. All was working well, except for the
fact that I had to occasionally power cycle the W2 wattmeter to get it
to connect. I built a small circuit that powers up the W2 wattmeter
when the DTR goes high when the software connects. The OS in the
computer and the W2 software has not changed.
It's almost as if the Elecraft W2 Interface software has stopped
functioning for some reason.
Joe
On 8/28/2016 12:45 PM, John wrote:
Hi Joe,
I'd not realised until now that you can do this with the W2, but I'm looking
to set mine up to test this now for you!
I assume you have the same W2 software running at both ends? It looks to me
that the network function simply bridges the software at both sides, based
on the manual.
When you say you are connecting to the remote W2, where are you doing this?
>From the 'client' machine? From the 'server' machine connected to the W2? If
from the 'client', what exact settings are you using?
You've not got anything like Windows Firewall running on either end, have
you? Have any updates been done on either PC? What OSs are you working with?
73, and a firm left handshake,
John (XLX)
-----Original Message-----
From: Elecraft [mailto:[email protected]] On Behalf Of JOE
Sent: 28 August 2016 16:59
To: [email protected]
Subject: [Elecraft] W-2 Wattmeter software
Hello to All,
I'm having trouble with connecting to the W-2 wattmeter with the Elecraft W2
Interface software available on the website using an internet connection.
The wattmeter is V1.00 software and the W-2 software is V1.12.1.18 The
error is "Looking for a W2 on Network".
I had this working in the past and now it has me stumped. Using Putty
communication software I can connect to the remote W-2 and it responds with
V1.00 when I invoke the "V" command so I know the connection is good. Using
a direct connection to the W2 from the computer com port works fine. I'm
using the factory cable that did work in the past.
The W2 Interface software is set up with Network (TCP/IP) checked, Client,
and the server IP and port that worked with Putty.
This has me stumped. It has to be something simple that I am missing.
73, Joe, K1ike
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
