Hi You could set up a macro and use that to change bands, modes and power. 73 Tom va2fsq.com
Sent from my Samsung Galaxy smartphone. -------- Original message --------From: George Kidder <[email protected]> Date: 2016-08-29 6:29 PM (GMT-05:00) To: 'Elecraft Reflector' <[email protected]> Subject: [Elecraft] Power "per mode and per band" I am inquiring if it is possible to have settings saved "per mode and per band". The current system seems to be "per band" only. Reason: Like many, I operate data modes as well as CW/SSB. On the latter two, the duty cycle is 50% or less, and running full power (100W) seems reasonable. However, on the data modes, the duty cycle is 100% during transmit, which bothers me, both since it might strain the amplifier and because there is generally no need for that power. However, if I back off the power for data modes, it remains backed off when I try to use SSB or CW on that band. It is easy to suggest programming fixes when I know nothing of the program. But if this is a reasonably easy one, it would be appreciated. Or maybe someone has found out how to do this with the present firmware (5.50)? George, W3HBM ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
