Thanks, Tom. I had thought of that, but since I use NaP3 to control
band/mode switching, there is no access (that I know of) to the built-in
macros which do that job.
73 - George, W3HBM
On 8/29/2016 6:41 PM, tomb18 wrote:
Hi You could set up a macro and use that to change bands, modes and power. 73
Tom va2fsq.com
Sent from my Samsung Galaxy smartphone.
-------- Original message --------From: George Kidder <[email protected]> Date: 2016-08-29
6:29 PM (GMT-05:00) To: 'Elecraft Reflector' <[email protected]> Subject: [Elecraft]
Power "per mode and per band"
I am inquiring if it is possible to have settings saved "per mode and
per band". The current system seems to be "per band" only.
Reason: Like many, I operate data modes as well as CW/SSB. On the
latter two, the duty cycle is 50% or less, and running full power (100W)
seems reasonable. However, on the data modes, the duty cycle is 100%
during transmit, which bothers me, both since it might strain the
amplifier and because there is generally no need for that power.
However, if I back off the power for data modes, it remains backed off
when I try to use SSB or CW on that band.
It is easy to suggest programming fixes when I know nothing of the
program. But if this is a reasonably easy one, it would be appreciated.
Or maybe someone has found out how to do this with the present firmware
(5.50)?
George, W3HBM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
