I don't actually have a K3/0-mini (I have the full-size K3/0), but I
do believe that you should be able to connect to it with the K3
Utility - that's how you would update its firmware.
It may be that something has failed inside he K3/0-mini ... or
something software in Windows regarding COM ports. If you have access
to another PC, you might try the K3 Utility there.....
73,
~iain / N6ML
On Fri, Sep 9, 2016 at 3:16 PM, Jeff Griffin <[email protected]> wrote:
> I just got back down here where the K3/0 is located. So Iain, your saying I
> should be able to talk to the K3/0 with the K3 utility at the control site?
> I just tried it and no, it doesn't see it on either of the two defined
> comports. I even brought a second USB cable to use between the laptop and
> K3/0. No Joy.
>
> This worked for over a year, and just stopped. No changes were made to any
> of the systems
>
>
>
> Jeff, can the K3 Utility talk to your K3/0-mini (when no other
>
> software is attempting to do so)? That will tell you if the problem is
>
> with the COM port plumbing or the DXLab Suite config.
>
>
>
> 73,
>
>
>
> ~iain / N6ML
>
>
>
>
>
> 73 Jeff kb2m
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
