Jeff, I can connect the the K3 at the remote transmit site or via local LAN - only difference is the "SIP CONTACT" address in "RADIO SETTINGS" on the RRC Control. I use DHCP for the control RRC when on the LAN.
Can you connect to the RRC radio unit via a browser interface from either the remote location or over the local LAN? That is the first step. 73 John N5CQ -----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of Jeff Griffin Sent: Friday, September 9, 2016 6:15 PM To: 'iain macdonnell - N6ML' <[email protected]> Cc: 'Elecraft Reflector' <[email protected]> Subject: Re: [Elecraft] K3/0 control not working with DXLap or N1MM I'm going to bring the control setup to the radio site when I head up there and work it out on the LAN. I'm starting to think the K3/0 is broke. Would anyone using the K3/0 with control s/w like to share their K3/0 config settings? Also maybe I'm having a senior moment, I do connect the K3/0 to my laptop not the RRC's USB port right? 73 Jeff kb2m -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of iain macdonnell - N6ML Sent: Friday, September 9, 2016 7:08 PM To: Jeff Griffin Cc: Elecraft Reflector Subject: Re: [Elecraft] K3/0 control not working with DXLap or N1MM I don't actually have a K3/0-mini (I have the full-size K3/0), but I do believe that you should be able to connect to it with the K3 Utility - that's how you would update its firmware. It may be that something has failed inside he K3/0-mini ... or something software in Windows regarding COM ports. If you have access to another PC, you might try the K3 Utility there..... 73, ~iain / N6ML On Fri, Sep 9, 2016 at 3:16 PM, Jeff Griffin <[email protected]> wrote: > I just got back down here where the K3/0 is located. So Iain, your > saying I should be able to talk to the K3/0 with the K3 utility at the control site? > I just tried it and no, it doesn't see it on either of the two defined > comports. I even brought a second USB cable to use between the laptop > and K3/0. No Joy. > > This worked for over a year, and just stopped. No changes were made to > any of the systems > > > > Jeff, can the K3 Utility talk to your K3/0-mini (when no other > > software is attempting to do so)? That will tell you if the problem is > > with the COM port plumbing or the DXLab Suite config. > > > > 73, > > > > ~iain / N6ML > > > > > > 73 Jeff kb2m > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > [email protected] ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2016.0.7752 / Virus Database: 4649/12972 - Release Date: 09/08/16 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
