Larry,
It is not exactly what you are asking for, but you can see what the
default setting is for most menu entries - hold the MENU button for 3
seconds to bring up the Menu Help in the VFO B area. The default
settings are in parentheses.
See Menu Help Information in the KX3 manual. If you get totally lost in
the menu experiments, restoring to the default gives you a fresh
starting point.
Before experimenting with changes, it is always a good idea to save the
KX3 Configuration using KX3 Utility. You can always restore the
configuration file created before you began the experiments - of course,
that does not work if you are experimenting in the field with no
computer available.
If you will be dealing with multiple computers, it is a good idea to
save the configuration file on a memory stick instead of the default
location on you computer hard drive.
73,
Don W3FPR
On 9/11/2016 1:15 PM, Larry D. Warner wrote:
I just got my license in December and am learning. Part of my learning
process is to change things on the KX3 and see how it responds or what is
better/worse than before the change. Sometimes I get lost in a menu or
forget what the prior setting was.
I grew up in the electronic test equipment world working for Fluke 30 years
in sales. Many of the instruments we sold had memory that stored all the
current settings of the instrument. Useful for rapidly going to a new setup
or getting back to where you started if you didn't remember how you got
there.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
