HiMy edgeport mutiserial port usb device will lock up as well as any software when I transmit at over 100w on 160 and 80m. The only thing that will restore things is to do a power down. Its possible that you may have an rfi issue. Check any usb hubs too. 73 Tom
Sent from my Samsung Galaxy smartphone. -------- Original message --------From: Jerry <[email protected]> Date: 2016-09-11 4:30 PM (GMT-05:00) To: [email protected] Subject: [Elecraft] Commander in DxLab locking up I have been successfully using DxLab as my logging/control program for my K3S for a few months now. About 2 weeks ago and again yesterday the Commander module locks up. If I am not attentive it ends up logging contacts on the 'locked up' freq and mode. I am using a new HP computer in the shack with Windows 10 connecting to the K3S with the USB port. The applications manager is unable to force Commander down. The only choice I have is to close everything else n then manually turn off the computer. When it reboots all is good. I have started to shut down Commander when I shut off the K3S - the computer runs 24/7 as there are scripts running for auto backup to my NAS. My issue sounds somewhat familiar to a recent post here. Any suggestions where to start? Life is short Ride hard ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
