This is a well known symptom of a loss of the virtual serial port -
Windows is turning off power to the USB port feeding the K3S (or
the K3S is being turned off before the computer).  It can also occur
if common mode RFI results in a high RF voltage on either the USB
port in the computer or the USB UART/bridge in the K3S.

If the lockup occurs when one transmits - particularly on only one
or two bands - look for common mode RFI (see K9YC's tutorials).  If
the lockup occurs when the the computer sleeps, the K3S is turned
off, or after random periods of inactivity, disable the Windows "Power
saving Settings" - particularly "USB Selective Suspend" -  in the
Windows Control Panel so Windows will not disable the USB ports and
cause the virtual serial port to "go away" unexpectedly.

73,

   ... Joe, W4TV


On 9/11/2016 4:30 PM, Jerry wrote:
I have been successfully using DxLab as my logging/control program for my K3S 
for a few months now. About 2 weeks ago and again yesterday the Commander 
module locks up. If I am not attentive it ends up logging contacts on the 
'locked up' freq and mode.
I am using a new HP computer in the shack with Windows 10 connecting to the K3S 
with the USB port.
The applications manager is unable to force Commander down. The only choice I 
have is to close everything else n then manually turn off the computer. When it 
reboots all is good.
I have started to shut down Commander when I shut off the K3S - the computer 
runs 24/7 as there are scripts running for auto backup to my NAS.
My issue sounds somewhat familiar to a recent post here.
Any suggestions where to start?




Life is short
Ride hard
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

Reply via email to