On Tue, Sep 13, 2016 at 8:04 AM, Jim Miller <j...@jtmiller.com> wrote: > For those of you implementing remote operation: what are you using for an > IP accessed power switch? I need one port to control station A/C power and > another to toggle the K3s power control line on the ACC connector.
I use an old ("telnet" interface) WTI Network Power Switch that I rescued from a recycle pile. Digital Loggers Inc make a good/inexpensive "Web Power Switch". For powering-on the K3 via ACC pin 8, I use a RS232 port on an onsite PC, with the same simple circuit used for FSK keying. 73, ~iain / N6ML ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com