Hi Don, I meant if the KAT500 is in bypass mode, what will the SWR meter on the KPA500 show?
Thanks, Barthold -----Original Message----- From: Don Wilhelm [mailto:[email protected]] Sent: Wednesday, September 14, 2016 2:26 PM To: Barthold Lichtenbelt; 'Dick Dievendorff'; 'Joe K2UF'; [email protected] Subject: Re: [Elecraft] SWR question Barthold, No, the KPA500 will see the SWR at the *input* to the KAT500, and that is what it will display. The tuner will attempt to create a low SWR when it tunes. The output side of the KAT500 will be the SWR that is presented by the antenna feedline. The KAT500 Utility will show you that bypassed VSWR value even though the KAT500 is not bypassed. 73, Don W3FPR On 9/14/2016 3:55 PM, Barthold Lichtenbelt via Elecraft wrote: >> The KAT500 Utility will show the "bypass VSWR", which is the SWR >> observed > by the ATU when it is in Bypass. > > As will the SWR meter on the KPA500, right? > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
