Barthold,
If the KAT500 is in bypass you should see a similar SWR indicated on
both the KAT500 and the KPA500.
They may not be exactly the same due to component tolerances in the
wattmeters.
I am not sure what your goal is in asking that question. If it is a
quick check on your antenna system, then that indication should be adequate.
If you really want to know the SWR on the feedline with greater
accuracy, measure it with an antenna analyzer or put the Elecraft W2
Wattmeter in-line.
73,
Don W3FPR
On 9/14/2016 4:54 PM, Barthold Lichtenbelt wrote:
Hi Don,
I meant if the KAT500 is in bypass mode, what will the SWR meter on the
KPA500 show?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
