Ron,
You likely have CW+SSB turned on. It is one of the sub-functions of the
CW WGHT menu. Look at page 55 of the manual. Tap [1] to toggle it on/off.
If you have an older manual, you will not see it - download a new manual
from Elecraft.
73,
Don W3FPR
On 10/3/2016 2:41 PM, Ron Manfredi wrote:
I have been getting acclimated to my (new to me) K3 and marveling
over its many ways to customize its operation. Made some SSB
contacts, and decided to try CW.
I connected my paddle, and did some quick tests on CW. I have found
that even when I am in USB or LSB modes, keying the paddle causes the
rig to transmit cw. This happens even with the rig in the PTT mode
on sideband. It this correct, or have I missed a setting somewhere?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
