You should see 100 watts on ALL bands so, yes, those are down. Are you making a minimum of 10 watts out on all bands with the KPA100 disabled?
I don't have a KAT100 myself, so I won't speculate on what might have caused your original issue beyond the obvious observation that, apparently, it wasn't really out of the circuit in some way. It may not have been tuning, but clearly there wasn't a 50-ohm non-reactive path through it either. Ron AC7AC -----Original Message----- Ron, This was into a dummy load. I had it into the KAT100 which was disabled and unplugged. So only the feedline was left connected though the ATU. Once I removed the KAT100 it worked. With the AT removed I did check power output into a dummy load and got the following 160- 131 watts 75- 118 watts 40- 119 watts 20- 54 watts 17- 55 watts 15 -98 watts 12 - 78 watts 10- 99 watts. So 20 and 17 are down and 12 slightly?? So I am thinking it must be ATU related and not the 100watt amp section. Thanks Rich kd0zv _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
