Hello. Have check now and find - PTT setting is not saved. I have set it to RTS-OFF, after turning off (by power button, not by power supply) and turning on again - setting of PTT is OFF-OFF. s/n of TRX is 10944 with firmware 5.50.
Regards. -----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of Don Wilhelm Sent: Monday, October 24, 2016 5:14 PM To: Jeff <[email protected]>; [email protected] Subject: Re: [Elecraft] (no subject) Jeff, I have no idea what you are doing wrong, but here are a few thoughts: After making the menu change, are you exiting from the menu? Tap the MENU button. Are you 'pulling the plug" when you say you turn the radio off and back on? Just like your computer, you must use the POWER button if the state is to be saved. Do you have anything plugged into the USB or RS-232 port that might be causing a command to reset the menu entry? Pull out the USB cable and/or the RS-232 cable and try again. 73, Don W3FPR On 10/24/2016 9:24 AM, Jeff wrote: > Good morning. I am having a problem getting my K3S to save in the config menu the setting for PTT-PTT. When I set it for RTS-DTR, hit menu it works fine. Then I turn the radio off and back on and the PTT-PTT setting is back to OFF-OFF. What am I doing wrong? How do I get the Config menu to save the PTT-PTT setting to RTS-DTR? > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
