Setting up VOX/AntiVOX levels in my K3S is much fussier than my K3. In spite of
the protestations of the pro audio guy, IMHO, VOX settings should be independent
of mic gain settings. I realize this isn't the case for either radio, but the K3
is simply easier to setup.
Likewise setting audio levels for AFSK RTTY operation using the K3S internal USB
sound card is a PITA. I've actually considered going back to the computer sound
card. I've raised these issues here in the past and once was asked how would I
like VOX levels remembered by mode. I thought that would be helpful, but it's
never happened, despite a promise to bump it "up the list."
On 11/3/2016 12:58 PM, louis a. ives wrote:
I have upgraded my K-3 with all available new K3s updates and I just received
it back from Elecraft (check up and align). There is a great improvement in
performance but I now notice that when I set up my Heil Proset (ic) headset for
Vox use, I must run the anti-vox a lot higher than I used too (30-35). I also
have noticed that the Vox gain must be at the lowest level. I use the settings
for my tx and rx eqs set to the recommended setting in KE7X, Fred Caddy book
and they have worked great in the past. I need to know if anyone has found the
same thing and if there are other recommended setting. What am I missing here?
Thanks in advance.
KJ4ZSI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
