That hasn’t helped my KPA500. I notice it particularly after a band change.
…bill nr4c > On Nov 13, 2016, at 10:58 PM, Vic Rosenthal 4X6GP <[email protected]> wrote: > > Hi Barthold, > > Maybe the K3S output is ramping up slowly. Do you notice this with the KPA500 > off? Running the TX Gain Calibration in the K3 Utility might help in that > case. > > 73, > Vic, 4X6GP > Rehovot, Israel > Formerly K2VCO > http://www.qsl.net/k2vco/ > > On 14 Nov 2016 00:51, Barthold Lichtenbelt via Elecraft wrote: >> Hi All, >> >> >> >> Maybe you can help with something that is baffling me. My KPA500 doesn't go >> to full output until I have spoken my callsign (when trying to get through a >> pileup) a few times. It starts off with 100 or so watts, and after a few >> iterations rises to the full 500W output. I see this both on the KPA500 LED >> bar, as well as on the P3 PEP output monitored by P3TXMON. My full setup is >> K3S+KPA500+KAT500+P3+P3TXMON. All devices run the latest released firmware. >> >> >> >> Any thoughts much appreciated! >> >> >> >> Barthold >> >> AD0RM > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
