Noel: > On Nov 17, 2016, at 10:16 AM, NOEL POULIN <[email protected]> wrote: > > Anybody in this group using the K3S \REMOTE with the k3/mini control head and > remote rig boxes? > I would like to control my k3s remote with the control head(mini) and control > rig boxes... > I would like to control the k3s from another room…not over the internet....
The Remote Rig interfaces work fine on an internal LAN (Local Area Network). Simply configure the RRC-1258MKII device (the one by the K3/0-mini) to connect to the Local IP address of the Remote Rig RR-1258 device controlling the K3s. > I would have many questions to ask before ordering........I am using the > P3…and I was told that the P3 must be off when operarting the k3 > remote???..... Not true; the P3 can remain on (it will turn on if you have the power for the P3 supplied by the K3s). However, you won’t have access to the P3 screen and buttons from the K3/O-Mini operating position in the other room. This means of course that there isn’t much point having the P3 on anyway if using the K3/0-Mini in the other room. Hope this helps, Barry Baines, WD4ASW Westborough, MA Folkston, GA > Thanks > Noel > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
