Hello Scott: It depends upon which way you have the paddles "pointed", to the left or to the right. That reverses the dot and dash paddles.
To get the dot and dash functions on the desired paddles once you have them positioned as you like, just enter the MENU and select INP, then choose between PDn or PDr (normal or reversed). No wiring changes needed. 73 Ron -----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of K9MA Sent: Thursday, November 24, 2016 12:06 PM To: [email protected] Subject: [Elecraft] Paddle Wiring When I built my KX1, I discovered that the paddle (KXPD1) was wired so the default setting was that the paddle was pressed to the LEFT for dits, just the opposite of the way bugs have always been made, and the way most people wire their paddles, as far as I can tell. I'm left-handed, but I learned to sent with a bug (some 50 years ago), so I just re-wired the KXPD1 so I don't have to keep changing from the default setting. Now, rumor has it that both Eric and Wayne are lefties. Could this be the explanation for the KXPD1 wiring? 73, Scott K9MA -- Scott K9MA [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
