Hi All, I am having a problem and I hope someone out there might be able to help me.
I am putting the final touches on setting up the station to operate remotely. I have used this setup last year and it worked perfectly. This year I am having a problem with receiving the CW side tone. Here's the set up: Both the remote & control PCs are running Win7 64 bit. I am using a Webrelay to turn on the K3. I am using TeamViewer to remote into the "remote" PC. I am using Win4K3Suite to control the raido. I am using N1mm+ for my logging/contesting, etc. I use Skype on both computers to hear the audio from the K3 radio and see the P3 via webcam On the control side, I can hear the background noise and stations and work (S7P and run) with no problem, just can't hear my side tone. I come to the "remote" side, using N1MM+ for S&P and run, I can hear everything including the side tone. For some reason, the side tone is not coming over to the control PC. I think that's everything! Any ideas? Maybe a setting? The Monitor level is set fine on the K3, so that's not the problem. I contacted Tom, author of Win4K3Suite and he suggested I contact this group. Thanks in advance, 73 de Jim - KE8G ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
