George, That did the trick! Thanks for helping me out. 73 de Jim - KE8G
Sent from my iPad > On Dec 3, 2016, at 8:14 PM, George Kidder <[email protected]> wrote: > > The following answered my similar question: The version I received was 5.53, > and the monitor tone is back. > > George, W3HBM > > I believe this is corrected in the latest field-test firmware release (5.53) > which I'll send you. > > 73, > Wayne > N6KR > > > On Sep 8, 2016, at 8:34 AM, Classe Bergman<[email protected]> wrote: > > Hi, > Today I upgraded my K3 with new FW, I was using 5.38/2.86 and I installed > 5.50/2.87 > I then discovered that the CW Monitor audio was lost on Lin Out. First I > tought that some settings was messed up but could not find anything. I > then downgraded my K3 to 5.38/2.86 and the CW Monitor audio was back ! I > found that if I change settings from LIN OUT = "Nor"as I normaly use to > "=Phones", the CW Monitor audio comes back. So something have changed the > function of Line Out audio in the new FW release. > Since all audio levels follows the Front AF vol when using "=Phones" this > mess up levels to my soundcard in the PC. My K3 s/n 1464 have the old KIO > board without USB interface > > Is this a known bug ( or maybe a feature ..) ? > > 73 Classe SM3GSK > > >> On 12/3/2016 3:42 PM, Jim - KE8G wrote: >> Hi All, >> I am having a problem and I hope someone out there might be able to help me. >> >> I am putting the final touches on setting up the station to operate >> remotely. I have used this setup last year and it worked perfectly. This >> year I am having a problem with receiving the CW side tone. >> >> Here's the set up: >> Both the remote & control PCs are running Win7 64 bit. >> I am using a Webrelay to turn on the K3. >> I am using TeamViewer to remote into the "remote" PC. >> I am using Win4K3Suite to control the raido. >> I am using N1mm+ for my logging/contesting, etc. >> I use Skype on both computers to hear the audio from the K3 radio and see >> the P3 via webcam >> >> On the control side, I can hear the background noise and stations and work >> (S7P and run) with no problem, just can't hear my side tone. >> >> I come to the "remote" side, using N1MM+ for S&P and run, I can hear >> everything including the side tone. >> >> For some reason, the side tone is not coming over to the control PC. >> >> I think that's everything! >> >> Any ideas? Maybe a setting? The Monitor level is set fine on the K3, so >> that's not the problem. >> >> I contacted Tom, author of Win4K3Suite and he suggested I contact this group. >> >> Thanks in advance, >> 73 de Jim - KE8G >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
