You can configure the K3 to provide frequency information on its serial port as you QSY. It's a configuration menu setting "auto info".
73 de Dick, K6KR -----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of W0MU Mike Fatchett Sent: Wednesday, December 14, 2016 13:03 To: [email protected] Subject: Re: [Elecraft] SteppIR controller with K3S+P3 Even with a Y cable from SteppIR the controller only listens to the signals. It does not ask for anything. So you have to have something that is sending out polling data regularly, which is why you need the computer. Alternatively if you us a Microham controller there is a good chance you can buy their Ilink cable and hook it into the SteppIR and you are set. The Microham will also defeat you Xmitting while the antenna is moving. W0MU On 12/14/2016 1:28 PM, Dick Dievendorff wrote: > I googled "stepper y cable" and found these. Maybe the other "hits" will be > of use as well. > > http://www.steppir.com/wp-content/uploads/2011/10/Y-Cable.pdf > > http://www.steppir.com/wp-content/uploads/2011/10/Transceiver-Interfac > e-Operation-5-28-09.pdf > > Have fun! > > 73 de Dick, K6KR > > > > > -----Original Message----- > From: Elecraft [mailto:[email protected]] On Behalf Of > Jean-François Ménard > Sent: Wednesday, December 14, 2016 11:57 > To: [email protected] > Subject: [Elecraft] SteppIR controller with K3S+P3 > > Hi everyone! > > I am a happy new owner of a brand new K3S and a P3, and everything is working > quite well. > > Now, I would like to connect my SteppIR SDA-100 antenna controller to the > K3S. I would like to be able to not use the computer to control the antenna > controller. > > Any suggestion from a few hams with similar setup as mine on how to use the > SDA-100 without the needs of a computer? > > My guess is I should do a Y cable between the connector labeled PC behind the > P3 by using only the PIN 2 and 5 then thru the SDA-100 ??? > > 73 de Jeff | VA2SS > > __________________________________________ > Jeff | VA2SS > Jean-François Ménard > > [email protected] <mailto:[email protected]> > www.VA2SS.com <http://www.va2ss.com/> > > Message envoyé à partir de mon appareil mobile. > Message sent from my portable device. > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > [email protected] > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
