I usually don't run barefoot at 100W and don't drive my amp with more than around 50W. Tonight when I tried running at 100W on 160 I was surprised to find it only putting out 81W. It puts out incrementally till 81W and then even though I can adjust the power so it reads 100W on the K3s LCD bar and numerical display, the watt meter in the P3 and the LP-100A both show the wattage stopping at 81W.
With the ATU in or out it gives 81W out on 160, SWR is 1.28 All other bands except 6M give around 98W, 6M gives 87W Any ideas what might be causing the lower output on 160? Thanks & 73, Gary KA1J ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com