My first guess is that either DTR or RTS is being asserted by WSJT and
you have it configured in your K3 for PTT. CONFIG --> PTT-KEY -->
OFF-OFF will do it if that's the case. Happened to me.
73,
Fred K6DGW
Sparks NV
Washoe County DM09dn
On 12/21/2016 4:39 PM, Howard Sherer wrote:
I have installed the new version of WSJT-X and when changing the bands on
my K3s, I get the ERR KEY code on the display and the K3s is forced into
Tx. I must power cycle the K3s to clear, but repeats when I go to these
bands again.
This occurs only on 80, 20, 17, 15, 10, & 6M, the other bands are fine?
Any ideas?
Howard AE3T
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2016.0.7924 / Virus Database: 4739/13634 - Release Date: 12/22/16
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
