Bill,
Check to see which antenna is selected. Having the K3 set for ANT2
while the antenna is set for ANT1 will cause that behavior.
73,
Don W3FPR
On 12/26/2016 5:23 PM, Bill Ellis via Elecraft wrote:
Hi all,
My K3 has been operating quite well until yesterday. I went to tune-up om 40
mtrs and the autotuner registered 25:1. On all other bands, it tunes properly.
I then put my analyzer on the coax in the shack and it read 2.1:1. Should not
be a problem for the autotuner. From what I'm seeing, the problem appears to be
with the K3. What am I missing here?
Thanks for any help.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
