I was going to say the same thing. You are on the wrong Ant.
On 12/26/2016 3:38 PM, Don Wilhelm wrote:
Bill,
Check to see which antenna is selected. Having the K3 set for ANT2
while the antenna is set for ANT1 will cause that behavior.
73,
Don W3FPR
On 12/26/2016 5:23 PM, Bill Ellis via Elecraft wrote:
Hi all,
My K3 has been operating quite well until yesterday. I went to
tune-up om 40 mtrs and the autotuner registered 25:1. On all other
bands, it tunes properly. I then put my analyzer on the coax in the
shack and it read 2.1:1. Should not be a problem for the autotuner.
From what I'm seeing, the problem appears to be with the K3. What am
I missing here?
Thanks for any help.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
