Jim,
Is the Heil plugged into the rear, or the front? If in the rea, then you
must first unplug the RRC to prevent a remote connect, then switch the
audio to the rear jack. If you leave the RRC's connected, you will only
change the remote K3 and not the control K3.
73,
Mitch DJ0QN / K7DX
Mitch Wolfson DJØQN / K7DX
10285 Boca Cir, Naples, FL 34109
Skype: mitchwo
USA: Home:+1-239-221-9600 - Mobile:+1-424-288-9171
Germany: Home:+49 89 32152700 - Mobile:+49 172 8374436
On 26.12.2016 20:27, Jim Larson wrote:
I have a K3S connected to a remote K3 using the RemoteRig boxes. With the MH2
hand mic everything works great, but with my new Heil ProSet with the iC
element (purchased from Elecraft), I do not get any transmit audio at all.
Running the ProSet into the local K3S (no RemoteRig), I am getting audio out,
so I know the headset is fine.
Is there a configuration change that needs to be made on the RemoteRig to work
with this ProSet iC element?
Thanks, Jim - KK7A
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
