Not to mention, are the signals in the K-POD on the same pins as Ethernet, therefore, you’re using the pairs on the +ve & -ve sides of the signals, or if different, you be mixing signals across the pairs?
73 de David, M0XDF Some tortures are physical / And some are mental, / But the one that is both / Is dental. -Ogden Nash, poet (1902-1971) > On 16 Jan 2017, at 16:42, Jean-François Ménard <[email protected]> wrote: > > Hi, > > Unfortunately, something I did not mentioned in my previous post, it was > implicite for me, but by using CAT6 cable, I was thinking about making our > own cable and connectors to avoid using flat ribbon cable. > > The twisted part of the cable will improve communication reliability for > sure. Noel mentioned to me that he needs a cable run approximately 25 feet > long. My guess, this should work. But many other factors must be involved, > like "how the station has been properly setup? », and so on. > > Experimentation here is the key…. an important part in our hobby. :-) > > Best 73 de Jeff | VA2SS > __________________________________________ > Jeff | VA2SS > Jean-François Ménard > > [email protected] <mailto:[email protected]> > www.VA2SS.com <http://www.va2ss.com/> > > Membre de / Member of : > ARRL / AMSAT / QRP ARCI / FISTS / SKCC / MICHIGAN QRP CLUB > > Message envoyé à partir de mon appareil mobile. > Message sent from my portable device. > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
