Not all of Expert 1.3 are sold with internal antenna tuner. There are amps without it. If I were in Jerry's situation I would purchase internal antenna tuner from Expert for the sake of integration and speed.

73, Igor UA9CDC


20.01.2017 3:20, Jim Brown пишет:
On Thu,1/19/2017 1:59 PM, Jerry Muller via Elecraft wrote:
I am  looking
for a Antenna Tuner. I have selected a Palstar HF Auto.

Why an automatic tuner? The amp has an auto-tuner, and the two are unlikely to play well together. Instead, I'd look at a good manual tuner like the Ten Tec 238. I've owned several of them and find them to be good performers. So did ARRL Labs when they tested them many years ago.

Ten Tec has been sold a couple of times and new 238s are probably no longer available, but used 238s are usually available on the used market. Best bet are the B and C models, which have a vernier readout for the inductor, as opposed to a dial cord in the older models. Expect to pay about $400 for the B or C, $300-350 for the older units. The 229 is electrically and mechanically the same as the older 238s, but in a cabinet that matches older Ten Tec rigs.

To use this tuner in your station, set the SPE to bypass mode, tune it for the bands where you operate and log the settings. Then put the SPE tuner back in line in auto mode and let the auto tuner do its thing to cover the band(s) as you QSY.

73, Jim K9YC

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
.


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

Reply via email to