ALC display is independent of audio input (front mic, rear mic or line in). Press [hold] the DISP/METER button to toggle between CMP/ALC and SWR/PWR displays.
Trying WSJT-X , DATA-A mode, and while I have power out, no ALC is
> displayed, and I’m concerned about overdriving JT modes are AFSK - one tone at a time with phase continuous, zero crossing transitions. They are designed for operation with class C (saturated) amplifiers so unless you overdrive the mic preamp and cause clipping before the mic gain control in most transceivers it is nearly impossible to create distortion. That said, simply adjust the audio input level for *four bars* on the ALC scale *as documented in the K3/K3S Owners Manual* (using a combination of the Windows Mixer output for your soundcard, the output level control (if any) on your interface and the MIC Gain encoder on the K3/K3S) for any digital mode. 73, ... Joe, W4TV On 1/22/2017 9:39 AM, Jamie WW3S wrote:
Is it possible to display ALC while using the line in jack on the rear panel? Trying WSJT-X , DATA-A mode, and while I have power out, no ALC is displayed, and I’m concerned about overdriving..... ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
