Thank you to the three people that responded to this so far but each of you accused me of having my friend run three tuners in a row. The KX3 turns it's tuner off when it senses the KXPA100 is connected and turned on. There is a setting in the MENU to turn off the tuner in the KXPA100 which we did and have to keep watching as the equipment keeps wanting to turn it back on. The problem we are having is tuning the KAT500. Hi SWRs are sent back to the KXPA100 and it trips out. I was hoping there is someone out there that is making this work. I have a K3S myself and a KAT500 and they work perfectly together at 25 watts for tuning than the full 500 watts after it is tuned. My friend does not have a K3S so we need to make the KX3 and KXPA100 work.
Thank you KEN. W0CZ [email protected] Sent from my iPad > On Jan 25, 2017, at 1:45 PM, Kenneth Christiansen <[email protected]> wrote: > > Hi to the group > > I have a friend with the following equipment. > KX3 with built in tuner. > KXPA100 with built in tuner. > KPA500 > KAT500 > 50 ft of LMR400 coax > R9 vertical. > The KPA500 is not in the circuit at this time. > We try to tune the KPA500 using the station set for 20 watts and a hand key. > The KXPA100 often kicks out. The SWR of the KAT500 changes quite a bit over a > tuning cycle and I think that is what is causing the trouble. > > Is anyone else using this combination of equipment and can give us some guide > lines on setting up each piece of equipment and a procedure to tune up the > KAT500 without hurting the KXPA100? > > Thanks to anyone that can help as this has turned into an expensive problem > that has destroyed three pieces of equipment. > > Ken. W0CZ > [email protected] > > Sent from my iPad > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
