Hi Ron, Stan was asking about the KX2 which to my knowledge has no 2M/4/M module available. Wish it did :-).
None the less a spectacular rig. Cheers, Glen VK1FB On Wednesday, February 8, 2017, Ron D'Eau Claire <[email protected]> wrote: > To answer your question, there are 10 ohm resistors in the phones line - > one in each channel. So you are losing more than half the audio power in > the resistors. (On the plus side, you'll still have an audio output working > even if you accidentally short the audio to ground!) > > If you are not using the 2M/4M module for VHF you might be able to install > a miniature jack for an external speaker. If you do not use the internal > speaker at all, you might just unplug it and connect direct to the speaker > connector near the internal speaker. > > Acoustical filters like that work very well. That one looks quite short. > I'm used to seeing a smaller diameter and longer pipe. I had one that was > driven by a single headphone and produced plenty of volume for a room with > my old rx, but that was back in vacuum tube days when receives typically > pumped out a watt or more of audio. > > 73, Ron AC7AC > > > > > -----Original Message----- > From: Elecraft [mailto:[email protected] <javascript:;>] > On Behalf Of stan levandowski > Sent: Monday, February 6, 2017 6:09 PM > To: Walter Underwood > Cc: [email protected] <javascript:;> > Subject: Re: [Elecraft] KX2 speaker/headphone question > > Nice speaker but unfortunately won't help me out here. I need mono output > for this speaker and it's only 2 inches and 8 ohms. If I could get the > volume from the headphone jack that I get from the KX2 speaker, I'd be > quite satisfied. Stan WB2LQF > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] <javascript:;> > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] <javascript:;> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
