Don, No, nothing in the LINE IN jack.
The audio setting on WSJT did also get changed. I put it back on CODEC. It is working now. I had to set CONFIG > MIC SEL = LINE IN, and increase the power slider on the WSJT screen. Thanks, John WA1EAZ > On Feb 9, 2017, at 12:53 PM, Don Wilhelm <[email protected]> wrote: > > John, > > Is there any chance you plugged something into the K3S LINE IN jack? Doing so > turns off the CODEC audio out and the audio is taken from the LINE IN jack > only. > > If nothing in the LINE IN jack, check the levels for the CODEC in your > computer. > > 73, > Don W3FPR > > On 2/9/2017 10:10 AM, stengrevics wrote: >> Was working fine, but today I have no output from the K3S on WSJT MSK144. If >> I select "Tune" on the WSJT screen and try to adjust the Mic gain control, I >> can't get any reading on the ALC meter. Any suggestions would be >> appreciated. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
