Never mind... Walked back through the setup and realized I hadn't set the installed SubRX filters on all modes... just CW.
All seems fine with the SubRX now. 73 de Chuck, WS1L On Sun, Feb 26, 2017 at 9:50 AM, Chuck Chandler <[email protected]> wrote: > Well, the Sub receiver was installed this morning, filters and config > seemed to complete without problem. > > However, the Sub-RX does not seem to be getting any signals. I see the > Ant=Main when I use B-Set, so it should be sharing the main antenna. > > Any suggestions? Nothing pops out on the CONFIG list, and I had three TMP > cables plugged into the SubRX module, there were only 3 jacks I saw. There > were no unplugged ends inside the case. There was one leftover TMP > cable... I thought it was for the 144 module I don't have. I may have to > open it up and re-check all the TMP cables. Unless it's a simpler fix. > > 73 de Chuck, WS1L > > -- > > > =================== > Chuck Chandler > [email protected] > =================== > -- =================== Chuck Chandler [email protected] =================== ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
