No need at all. I've been there many times before, and it's just a matter of time before I go there again.
- 73 and good DX de Mike, K6MKF, IDXC 2017 Committee > -----Original Message----- > From: Elecraft [mailto:[email protected]] On Behalf Of Don > Wilhelm > Sent: Sunday, March 05, 2017 4:22 PM > To: Bill Johnson <[email protected]>; [email protected] > Subject: Re: [Elecraft] P3 lost receive signal on monitor from K3s > > Bill, > > No need to "feel stupid". > Things like that happen all the time. > In all cases of failure, check the connecting cables first. They are the most likely > suspect although the first impression is to suspect a failure of the equipment. > Believe me, you are not the first, and likely will not be the last (unless everyone > remembers this information - not likely). > > 73, > Don W3FPR > > On 3/5/2017 7:04 PM, Bill Johnson wrote: > > Don, thanks. The cable fell off when changing some other cables. Feeling > stupid. > > > > _____________________________________________________________ > _ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
