Oh, in re-reading your message, it looks like the transfer rate is an issue. I've got my USB/Serial adapters out on USB hubs, so they don't get full bandwidth. Maybe that's the issue. Odd that a 4800 baud device needs 200+mb connection to work...
Thanks again Rich - KE1EV ---- [EMAIL PROTECTED] wrote: > I had the same issue with HRD and it was the USB serial adapter. The one I > was using had a transfer speed of 115 mbps which apparently wasn't > sufficient. Bought a Keyspan adapter with a transfer rate of 220 mbps and > all works well. I did have to go into the device manager and make a few > changes to the port settings for the Keyspan. > > Saw an Iogear adapter at WalMart for I think it was $29.00 that had a > transfer rate of 200 mbps and appear to work well from accounts I've read. > > 73, Ed N0EHQ > > > > I recently completed my K2. I assume that it has the very latest > > firmware. Although it works fine with k2Remote, it doesn't work reliably > > with any third-party software that I've tried. I've tried the latest > > version of dxLab commander, HamRadioDelux, and even purchased > > HamStationExtreme. Comander won't even connect with the K2. HRD keeps > > stalling when updating the frequency display. The current release of HSE > > doesn't appear to work. I'm waiting for an update. > > > > As far as I can tell from research I've been able to do, there are > > firmware problems in the K2 that make the interface unreliable. Elecraft > > says they don't have any room in their program space to add any flow > > control. Does anyone have any information about this problem or comments > > about other control software? > > > > Regards > > Rich - KE1EV > > _______________________________________________ > > Elecraft mailing list > > Post to: [email protected] > > You must be a subscriber to post to the list. > > Subscriber Info (Addr. Change, sub, unsub etc.): > > http://mailman.qth.net/mailman/listinfo/elecraft > > > > Help: http://mailman.qth.net/subscribers.htm > > Elecraft web page: http://www.elecraft.com > > > > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
