What I did the first time on several different Windows 10 systems was plug in the USB cable and waited (for several minutes) for Windows to find the required device driver from Windows Update. I've never had to install a device driver from The FTDI site.
YMMV... Dick, K6KR -----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of Richard Lawn Sent: Saturday, March 18, 2017 10:56 To: [email protected] Subject: [Elecraft] K3 not Seen By Computer after OS upgrade I bit the bullet and upgrade from Win 7 to 10 this morning in an effort to address some issues I just couldn't live with any longer. All was fine until I plugged the USB cable from my K3 into the computer and nothing. No recognition what so ever. I went to the Elecraft site and downloaded and installed FTDI and Prolific drivers though I think it needed FTDI. Still nothing. I'm puzzeled though as I downloaded two different FTDI driver packages. One was an install package and the other is a folder with no obvious setup file for installation. The folder is labeled CDM v2.12.26 WHQL Certified. That's probably the one I needed to install but am at a loss in how to do that. Some advice would be appreciated. Rick, W2JAZ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
