I have the enhanced K3 with the USB hub add on so I'm using that way to connect to the computer - direct via USB. Still no dice and it worked fine when I was running Win 7 on same computer. This one is a head scratcher. Rick, W2JAZ
On Sat, Mar 18, 2017 at 2:58 PM, WP4CW <[email protected]> wrote: > I've had the same issue. Window 7 uses prolific drivers. Window 10 can, > but it a big mess. Go to radio shack and buy their ftdi USB cable. Window > 10 has the drivers , no need to update. Call me 209. 601.5354 > > Sent from my iPhone > > > On Mar 18, 2017, at 11:44 AM, Ron D'Eau Claire <[email protected]> wrote: > > > > Same here. No add'l driver needed. > > > > Maybe uninstall the FTDI site, restart the computer and, while connected > to > > the internet, plug in the USB device again. > > > > 73, Ron AC7AC > > > > -----Original Message----- > > From: Elecraft [mailto:[email protected]] On Behalf Of > Dick > > Dievendorff > > Sent: Saturday, March 18, 2017 11:23 AM > > To: 'Richard Lawn'; [email protected] > > Subject: Re: [Elecraft] K3 not Seen By Computer after OS upgrade > > > > What I did the first time on several different Windows 10 systems was > plug > > in the USB cable and waited (for several minutes) for Windows to find the > > required device driver from Windows Update. I've never had to install a > > device driver from The FTDI site. > > > > YMMV... > > Dick, K6KR > > > > > > -----Original Message----- > > From: Elecraft [mailto:[email protected]] On Behalf Of > > Richard Lawn > > Sent: Saturday, March 18, 2017 10:56 > > To: [email protected] > > Subject: [Elecraft] K3 not Seen By Computer after OS upgrade > > > > I bit the bullet and upgrade from Win 7 to 10 this morning in an effort > to > > address some issues I just couldn't live with any longer. All was fine > until > > I plugged the USB cable from my K3 into the computer and nothing. No > > recognition what so ever. I went to the Elecraft site and downloaded and > > installed FTDI and Prolific drivers though I think it needed FTDI. Still > > nothing. I'm puzzeled though as I downloaded two different FTDI driver > > packages. One was an install package and the other is a folder with no > > obvious setup file for installation. The folder is labeled CDM v2.12.26 > WHQL > > Certified. That's probably the one I needed to install but am at a loss > in > > how to do that. Some advice would be appreciated. > > > > Rick, W2JAZ > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[email protected] > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > Message > > delivered to [email protected] > > > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[email protected] > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > Message > > delivered to [email protected] > > > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[email protected] > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to [email protected] > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
