Ed,
If you are apparently plugging a mono plug into the KX3 MIC connector,
that is to be expected, use a stereo plug and turn MIC BTN off in the menu.
73,
Don W3FPR
On 3/19/2017 8:15 PM, Eddy Avila wrote:
I have older Dell laptop and new KX3 and KX3-PCKT cables.
With no digital software running the following happens all the time:
When I plug green-band cable from PC phones output to KX3 mic input the KX3
goes immediately into TX mode with no modulation. I followed the KX3 manual and
I'm using DATA A. Nothing what I do stops the KX3 from Tx when I plug both
cables in between the PC and KX3 mic connector.
VOX is turned off.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
