Yes the shaft is very slightly bent
73 Bob G3PJT
On 23/03/2017 09:51, Vic Rosenthal 4X6GP wrote:
Are you certain that a bit of fiber from the felt washer hasn't worked
its way between the shaft and the bushing? That is a known problem.
73,
Vic, 4X6GP
Rehovot, Israel
Formerly K2VCO
http://www.qsl.net/k2vco/
On 23 Mar 2017 11:41, Bob G3PJT wrote:
Hi Don
Thanks for the reply. I did know about the new encoder kit but the
problem is that of its cost when it gets here.
Elecraft quote 124USD for the kit, that's £100 here which then gets
VAT at 20% and a local handling charge - say a total of £130-140 and
as well if I read things correctly I will need to get a new knob.
So you can see that my problem is that unless I can get a cheaper
replacement I might as well sell the K2/100 either in bits for spares
or at a discount.
The encoder does work fine but it has suffered a knock which has made
it slightly stiff to turn, i.e it wont 'spin', but it is useable.
So thanks for the thoughts
73 Bob G3PJT
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
