I have installed the Winlink software but I cannot place my K3S into
transmit when using the Winmor protocol. The channel selection feature
changes frequencies on the rig properly. And, when I place the K3S into
transmit manually, the modem tones cause ALC to register.
As a side note, Fldigi works fine. Both Winlink and Fldigi are set to
the same COMM port and the K3S is in USB mode with under CONFIG:RS232.
Fldigi is not running when I use the Winlink software. I use the
Elecraft supplied KUSB cable between the computer and the K3S.
Can anyone give me a clue?
Thanks!
Tom
--
Tom Bingham WB7EUX
http://www.wb7eux.net/
SKCC 9833S
NAQCC 6346
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
