Wayne wrote: >> Someone armed with the KXAT2 schematic could write a little program that >> converts xx into microhenries and picofarads. I’d do it myself if I had the >> spare time.
Such a project is challenging because the KXAT2 schematic and parts values have *not* been made available outside very limited distribution. Holger wrote: > aeons ago you wrote the L/C values into this mailing list (even before the > schematic was released, AFAIK). *) > > I wrote a Python program that convers the bit pattern of the relais setting > that the AK serial command returns into uF and mH. See here: > https://gist.github.com/anonymous/5d53f5bdbc50782a9d5e2c8d7062be69 > > *) > http://elecraft.365791.n2.nabble.com/KX3-Operating-Tip-Determining-the-ATU-s-L-C-values-and-L-net-configuration-td7560189.html > is the post I used for the L/C values. That information applies to the KX3, *not* to the KX2 that is the target of Wayne's post. Necessary technical information in the form of schematics and part values has *not* been made generally available for the KXAT2. Mike / KK5F ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
