Both High/Low mic gain and bias settings are set by and recalled by port.
73,
matt W6NIA
On 4/2/2017 8:34 AM, Jim Miller wrote:
I wanted to have two headsets connected, one front and one rear.
Different settings including bias.
Can bias be set via macro also is it set individually by port?
Thanks, Jim KG0KP
-----Original Message-----
From: Elecraft [mailto:[email protected]] On Behalf Of Tom
Sent: Saturday, April 01, 2017 7:03 PM
To: [email protected]
Subject: Re: [Elecraft] K3 microphone settings
This will select the Front Mic and set compression to 20 and Mic Gain to
13:
MG013;CP020;MN053;DN;DN;MN255;
This will select the Rear Mic and set the Mic Gain to 9 and Compression to
20:
MG009;CP020;MN053;DN;DN;UP;MN255;
73,
Tom - KQ5S
On Sat, Apr 1, 2017 at 6:16 PM, Alan. G4GNX <[email protected]>
wrote:
I have tow microphones I'm using with my K3. One is part of the Yamaha
CM500 headset, plugged into the rear panel and the other is a Kenwood
MC-50 desk model, plugged into the front panel.
To save using multiple menu changes to swap between the two, I will be
writing a macro to use one or two buttons to implement this.
My problem is that each microphone requires a different gain setting
and when manually changing the menu settings between front and rear
panel, the gain settings don't track and have to be set separately on
the front panel gain control for each microphone.
Does anyone know if it's possible to change the mic gain setting as
part of a macro and possibly compression levels as well?
73,
Alan. G4GNX
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email
list: http://www.qsl.net/donate.html Message delivered to
[email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
--
"A delay is better than a disaster."
-- unknonwn
Matt Zilmer, W6NIA
[Shiraz]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
