I have the same set up. My front mic requires bias. My rear does not. The radio remembers the bias setting for the front and rear mic so I do not have to adjust it
73, Tom - KQ5S On Sun, Apr 2, 2017 at 10:34 AM, Jim Miller <[email protected]> wrote: > I wanted to have two headsets connected, one front and one rear. > Different settings including bias. > Can bias be set via macro also is it set individually by port? > Thanks, Jim KG0KP > > -----Original Message----- > From: Elecraft [mailto:[email protected]] On Behalf Of Tom > Sent: Saturday, April 01, 2017 7:03 PM > To: [email protected] > Subject: Re: [Elecraft] K3 microphone settings > > This will select the Front Mic and set compression to 20 and Mic Gain to > 13: > > MG013;CP020;MN053;DN;DN;MN255; > > This will select the Rear Mic and set the Mic Gain to 9 and Compression to > 20: > > MG009;CP020;MN053;DN;DN;UP;MN255; > > > 73, > Tom - KQ5S > > On Sat, Apr 1, 2017 at 6:16 PM, Alan. G4GNX <[email protected]> > wrote: > > > I have tow microphones I'm using with my K3. One is part of the Yamaha > > CM500 headset, plugged into the rear panel and the other is a Kenwood > > MC-50 desk model, plugged into the front panel. > > > > To save using multiple menu changes to swap between the two, I will be > > writing a macro to use one or two buttons to implement this. > > > > My problem is that each microphone requires a different gain setting > > and when manually changing the menu settings between front and rear > > panel, the gain settings don't track and have to be set separately on > > the front panel gain control for each microphone. > > > > Does anyone know if it's possible to change the mic gain setting as > > part of a macro and possibly compression levels as well? > > > > 73, > > > > Alan. G4GNX > > > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[email protected] > > > > This list hosted by: http://www.qsl.net Please help support this email > > list: http://www.qsl.net/donate.html Message delivered to > > [email protected] > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message > delivered to [email protected] > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
