I just installed the Sub receiver and the KBPF3A in my K3S. I have one complaint and one concern.
First the activation of the KBPF3A is very vague. It's mentioned in the users manual on page 60 (the configuration menu) but there's nothing that says, while in (CONFIG:KBFP3) that you have to press [SUB] and then select "nor". I double checked the installation manual for the sub receiver and the KBFP3A but there was nothing about activating the General Coverage filters. My concern is; I consider myself as an experienced kit builder but for me, it was a bit difficult installing the Sub-Receiver. The TMP cables were in the way and sub-receiver box was a bit difficult getting the SUBIN and SUBOUT boards to align and mate properly. Someone who is new to kit building would have a more difficult time. The sub-receiver is working great and the one thing I like about it is; it's a clone of the main receiver with FM, AM, 2.8, 400 and 250Hz filters. I wonder how the sub-receiver would stack-up on Sherwood Engineering's test data. Jack WA9FVP Willco Electronics ----- Jack WA9FVP Sent from my home-brew I5 Core PC -- View this message in context: http://elecraft.365791.n2.nabble.com/Sub-Receiver-KBPF3-tp7629327.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
