My most wonderful and understanding wife has requested that the
number of "wires" coming into the house be minimized. To
accommodate her wishes, I have an external antenna switch. It
would be very nice if all the Elecraft tuners could take an
externally provided antenna ID to use to recall the antenna
tuning parameters. A 4 bit "band ID" would be ideal, but a
command over the RS-232 interface would also work.
73 Bill AE6JV
On 4/25/17 at 7:50 AM, [email protected] (Wayne Burdick) wrote:
KPA1500 firmware will be updated to fully support such products
as we identify them. We oversized the microcontroller memory by
a factor of about 8 to allow for such expansion. In addition to
SO2R, there may be other gear such as antenna switches that we
can directly control from the amp’s antenna and ATU switches,
and status can be shown on the 32-character LCD.
-------------------------------------------------------------------------
Bill Frantz | Airline peanut bag: "Produced | Periwinkle
(408)356-8506 | in a facility that processes | 16345
Englewood Ave
www.pwpconsult.com | peanuts and other nuts." - Duh | Los Gatos,
CA 95032
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
